#Sagemcom fast 2704 firmware serial
#Sagemcom fast 2704 firmware update
#Sagemcom fast 2704 firmware mac

random: procd urandom read with 108 bits of entropy available VFS: Mounted root (squashfs filesystem) readonly on device 31:2.

#Sagemcom fast 2704 firmware update

Update your scripts to load br_netfilter if you need this. bridge: automatic filtering via arp/ip/ip6tables has been deprecated. bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec b53_common: found switch: BCM63xx, rev 0 1 squashfs-split partitions found on MTD device rootfs mtd: device 2 (rootfs) set to be root filesystem 5 bcm63xxpart partitions found on MTD device spi1.0 bcm63xxpart: Partition 4 is linux offset 10000 and length 7e0000 bcm63xxpart: Partition 3 is nvram offset 7f0000 and length 10000 bcm63xxpart: Partition 2 is rootfs offset 14f858 and length 6a07a8 bcm63xxpart: Partition 1 is kernel offset 10100 and length 13f758 bcm63xxpart: CFE boot tag found with version 6 and board type 0.690185] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000 io scheduler deadline registered (default) jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. squashfs: version 4.0 (1) Phillip Lougher futex hash table entries: 256 (order: -1, 3072 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) UDP hash table entries: 256 (order: 0, 4096 bytes) TCP: Hash tables configured (established 1024 bind 1024) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 1024 (order: 0, 4096 bytes) bcma_fallback_sprom: pci bus/device num mismatch: expected 0/0, but got 1/0 bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x14, class 0x0) bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x27, class 0x0) bcma: bus0: Found chip with id 43217, rev 0x01 and package 0x09 pci 0000:00:00.0: bridge configuration invalid (), reconfiguring pci_bus 0000:00: No busn resource found for root bus, will use registering PCI controller with io_map_base unset clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12897800188ns clocksource MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11479041721 ns Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) PID hash table entries: 128 (order: -3, 512 bytes) Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200 Built 1 zonelists in Zone ord grouping on.

Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes. Initrd not found or empty - disabling initrd board: board name: 0.000000] MIPS: machine is Sagem 0.000000] Determined physical RAM map:

#Sagemcom fast 2704 firmware serial

HS Serial flash device: name MX25L64, id 0xc217 size 8192KB

#Sagemcom fast 2704 firmware mac

If you choose to use a blank generic CFE, use these common options:īase MAC Address: 00:10:18:00:00:01 (anything other than 00's)ĬFE version 7.273.1 for BCM96318 (32bit,SP,BE)īuild Date: Tue Nov 18 11:25: (C) 2005-2012 SAGEMCOM Corporation. You can use the 'Original 2704N CFE' above. If you do not have access to the serial port. So you will need to connect a serial port to the router the first time you (re)power it up. With new/generic CFE's, the internal config/nvram will be blank (0x580 to 0x97F). Using a generic cfe will provide a bit better serial port info. You can aquire a generic 6318 CFE/Bootloader ( not a 6818) which is supplied in many GPL source codes made from 2014. With the original CFE (above): to access the Command Line you need to hold down the space bar (for at least 32 repeats) for the prompt.